News

Dynelectro’s SOEC Unit in Iceland delivers 86% LHV electrical efficiency at System Level with no stack degradation measurable, 3rd-party review confirms

November 17, 2026

Prof. Nigel Brandon of Imperial College London reviewed  2,520 hours of operation in Iceland reviewed performance of Dynelectro’s 250 kW Dynamic Electrolyser Unit with AC:DC operation technology and confirms exceptionally low electricity consumption and no detectable stack degradation.  

VIBY ZEALAND, Denmark – November 17, 2026 – A technical deep-dive into the operating data from Dynelectro’s 250 kW Dynamic SOEC Electrolyser Unit (DEU), featuring a single self-contained 250 kW electrolyser module, at Syntholene Energy Corp’s eSAF production facility in Húsavík, Iceland, confirms an average system electricity consumption of 38.60 kWh per kilogram of hydrogen produced with no detectable stack degradation over the period reviewed. Consumption figures are on system level and corresponds to a record-low electric consumption of 38.6 kWh/kg H2 for the entire electrolyser system.

Solid Oxide electrolysers has the unique advantage of being able to utilize industrial heat as a part of their energy supply, and the site is the first where an electrolyser is fully integrated with geothermal heat supplying 18% of the total energy consumed by the electrolyser.

The independent review was commissioned by site owner Syntholene Energy Corp. It was carried out by Prof. Nigel Brandon, OBE, FREng, FRS, of Imperial College London and covered approximately 2,520 hours of performance data – from commissioning through high-load operation.

For a developer, verified system-level electricity consumption and stack degradation are two of the inputs that matter most, and the review proves there is now a commercial alternative to traditional electrolyser technologies which is up to 40% more effective than any other commercial electrolyser system on the market.

What the data shows

System electricity consumption, including the stacks and auxiliary loads, averaged 38.60 kWh/kg H₂, corresponding to a lower heating value (LHV) of 86% electrical efficiency at system level. Stack consumption alone averaged 34.90 kWh/kg H₂, which puts the auxiliary load at just under 10% of the system consumption. In addition, unit consumes around 8 kWh /kg H₂ of thermal energy, bringing the combined energy consumption up to roughly 46.5 kWh/kg H₂. At Húsavík the thermal heat is supplied by  Syntholene’s proprietary geothermal coupling system.

The review confirmed best-in-class system level energy performance, no degradation in the stack voltage data, and no fouling or loss of performance in the heat exchangers. The report concludes that “the Syntholene Iceland Demonstration Facility has achieved proof-of-performance for its geothermally integrated SOEC.”

Proving a scalable SOEC solution, running autonomous at a remote location

The hydrogen from Húsavík supports Syntholene’s programme to produce synthetic aviation fuel. For Dynelectro, the purpose of the 250 kW DEU was to showcase the performance of our core repeat module which will be the heart of our future 5 MW dynamic electrolyser building block. Being the building block of a modular platform designed to scale to MW-class plants, and the field results are an important step towards commercial deployment at scale.

The 250 kW DEU has been supplied as a turn-key electrolyser solution to Syntholene’s industrial site in Husavik. The Dynelectro supply included system integration, power electronics and its patented Dynamic AC:DC control technology and the hotbox incorporates 10 of SolydEra’s G8X solid oxide stacks. The Dynamic Electrolyser Unit was installed, integrated with the sites geothermal heat source, commissioned & produced hydrogen within ten days of arriving in Iceland.

Dynelectro’s proprietary AC:DC operation has been active throughout operation at Húsavík. The core principle of AC:DC operation are short reverse energy pulses keeping the stack surface clean and securing stable operation regardless of load, without affecting system performance negatively. AC:DC is proven to reduce electrochemical electrode wear and requires no change to existing commercially available stacks.

“Power-to-X developers need efficiency and durability in the same unit, and they need to see it in the field. Húsavík shows both from a 250 kW unit running on low-temperature steam, with AC:DC active throughout. It is the design we are scaling into MW-class plants today with our first MW-scale plant in operation spring 2027” Sune Lilbæk, Chief Executive Officer, Dynelectro

AC:DC operation – a proven gamechanger for SOEC electrolysis

No degradation over approximately 2,520 hours with AC:DC active throughout is consistent with Dynelectro’s published 25,000-hour stack endurance test, which the report cites and describes as “impressive performance”.

The test was carried out with stack supplier SolydEra, Aalborg University and DTU Energy and published in Nature Communications (DOI 10.1038/s41467-026-78001-1). After initial conditioning, the stack voltage rose by only 0.05% per 1,000 hours over 22,000 hours. For reference, the EU’s 2030 target for solid oxide electrolysis is 0.5% per 1,000 hours. Read the full test results on dynelectro.dk.

Operation at Húsavík continues at higher loads, with Syntholene collecting further data on electrical efficiency, hydrogen production, thermal integration and system stability.

 

 

About Dynelectro

Founded in 2018, Dynelectro is a Danish solid oxide electrolyser OEM developing high-efficiency renewable hydrogen solutions for industrial decarbonisation and energy resilience. Its proprietary Dynamic AC:DC architecture is designed to combine the efficiency of high-temperature SOEC technology with extended stack lifetime and dynamic operation.

Dynelectro’s modular Dynamic Electrolyser Unit platform is designed to scale from a single 250 kW electrolyser module to more than 20 MW industrial installations, supporting the development of cost-effective renewable hydrogen production for e-fuels and industrial applications.

www.dynelectro.dk

 

Media contact

Kristian Ehrenskjold Laursen

Sales & Business Development Manager, Dynelectro ApS

Phone: +45 29 66 08 27

Email: krla@dynelectro.dk